- ●
- ●
- ●
電子信箱：zenggang_0605@126.com
公司地址：重慶市大渡口區八橋鎮公民村八社（公民小學旁）
冷軋三面帶肋鋼筋雙軋生產線
產品的組成：
放線架——除磷機——冷軋機（2臺）——牽引機——轉向機構——除應力機——高速調直切斷機——自動對齊落料架——變頻、伺服控制系統
This product line includes:
|
放線架Pay-off Stand |
1 Set |
|
除磷機Descaler |
1 Set |
|
冷軋機Cold Rolling Mill |
2 Sets |
|
牽引機 dragger |
1 sets |
|
轉向機構steering system |
1 Set |
|
除應力機Stress Remover |
1 Set |
|
高速調直切斷機 High-Speed Straightening and Cutting Machine |
1 Set |
|
自動對齊落料架 Automatic Aligning Blank Frame |
1 Set |
|
變頻、伺服控制系統 Frequency converter& SERVO control system |
1 Set |
產品概述：該生產線是我公司專業設計團隊經多年工作經驗總結，集同行業相關產品之所長精心設計的一款產品！其綜合性能屬國內一流產品！我們視客戶的需求為向導，完全站在客戶的立場充分考慮了產品在節能、高效、操作簡便、故障率低等相關問題。軋制后的冷軋帶肋鋼筋無需進入收線打包,直接進入高速調直機進行在線調直和自動剪切。具有剪切誤差小,生產效率高、故障率低等特點，完全實現了不停機連續生產的效果，大大的降低了勞動力投入和電力消耗。
Introduction: This production line is designed and manufactured on the basis of years’ experience and integrating the advantages of all congeneric products in steel rebar production field, and its overall performance keeps the leadership in China. We always keep consideration of clients’ requirements, which requires us standing on clients’ position for roundly and completely considering energy conservation, high-efficient, simple and convenient operation and low failure rate etc. the cold-rolled ribbed rebar, after cold rolling process, is not needed to be packed and directly into the high-speed Straightening machine for the Straightening and Automatic cutting process, so this approach results in low cutting deviation , high-efficient and low failure rate etc. Besides, this product line is completely available for continuously producing, thus, more labor cost and electrical power will be saved.
產品參數/Parameters
|
產品代號 Model No. |
LZDL150-1 |
LZDL150A-1 |
LZDL150B-1 |
|
原材料直徑：毫米 Diameter of WorkBlank, h mm |
6.5-10 |
6.5-12 |
6.5-14 |
|
軋制成品直徑：毫米 Diameter of Final products, mm |
5、6、7、9 |
5、6、7、8、9、11 |
5-12 |
|
最高軋制速度:米/分 Max. rolling Speed, m/min. |
140-150 |
140-150 |
140-150 |
|
綜合產能：噸/月 Overall Capacity, tons/month |
1200 |
1600 |
1800 |
|
實際電耗：噸/度 Actual Electricity Consumption, kw.h/ton |
12-14 |
12-14 |
12-14 |
|
易損件消耗：元/噸 Vulnerable part Consumption, RMB/ton |
4-6 |
4-6 |
4-6 |
|
標配可下料長度：米 Blank(Raw) length, m |
1.5 -12 |
1.5 -12 |
1.5 -12 |
|
切斷定尺誤差: 毫米 Shear gauge error rate, mm |
±5mm |
±5mm |
±5mm |
|
不直度偏差：毫米/米 Bending deviation error：mm/m |
≤3mm |
≤3mm |
≤3mm |
|
總裝機容量：千瓦 Production line overall power , kw |
65.5kw |
85.5kw |
105kw |
|
調速方式 Speed Regulation |
變頻調速 Frequency Converter |
變頻調 Frequency Converter |
變頻調速 Frequency Converter |
|
牽引主機型號 Motor Model |
JZQ650 |
JZQ750 |
JZQ850 |
|
減徑牽引數 Quantity of Diameter-reduction dragging |
2 |
2 |
2 |
|
調直牽引數量 Quantity of Straightening dragging |
2 |
2 |
2 |
|
剪切控制方式 Cutting regulation |
伺服/SERVO |
伺服/SERVO |
伺服/SERVO |
|
定尺控制方式 Shear Gauge control Method |
光電開關或選配PLC Photoelectric Sensor or PLC |
光電開關或選配PLC Photoelectric Sensor or PLC |
光電開關或選配PLC Photoelectric Sensor or PLC |
|
卸料方式 Discharge Method |
自動對齊料架“不停機生產” Auto.Align Stand “constantly working” |
自動對齊料架“不停機生產” Auto. Align Stand “constantly working” |
自動對齊料架“不停機生產” Auto. Align Stand “constantly working” |
|
軋輥潤滑冷卻方式 Cooling Method of Roller |
皂化液或拉絲粉 Saponification liquid Or Drawing Powder |
皂化液或拉絲粉 Saponification liquid Or Drawing Powder |
皂化液或拉絲粉 Saponification liquid Or Drawing Powder |
|
設備總重量：噸 Total weight, tons |
約7噸 About 7 tons |
約8.5噸 About 8.5 tons |
約9.5噸 About 9.5tons |